Swiss Cube: Project SWUBE

Faites-nous rêver avec vos aquariums !
Avatar de l’utilisateur
Ridgeway
Aquariodingue diplômé !
Aquariodingue diplômé !
Messages :442
Enregistré le :vendredi 31 juillet 2015 à 18:07
Localisation :Bercher
Swiss Cube: Project SWUBE

#1

Messagepar Ridgeway » jeudi 05 novembre 2015 à 22:45

Bonjour à tous,

S'il vous plaît excuser ma mauvaise écriture et que je vais passer à l'anglais comme langue française est si pauvre et que Googe traduire rend toujours amusant de moi .... Mais je pensé qu'il pourrait être intéressant pour vous les gars de voir mon projet qui est maintenant sur la façon de devenir un aquarium récifal.


Some of you may remember my previous aquarium, if not it is here

http://www.ultimatereef.com/TOTM/2012_february/" onclick="window.open(this.href);return false;

This aquarium is now gone and sold to another crazy reef keeper in VD so it may pop up at some point.....

I took the decision this time to go for a full custom aquarium and so the new one is as follows:

Display tank: 160 x 160 x 110cm
2 main sumps
Automatic 200ltrs water change

This gives me close 4000ltrs of reef to play with :grin:

Main equipment as follows:

Lighting: AI Hydra 52 x 12
Main pump: Abyzz A400
Flow: Ecotech MP60QD x 4
Skimmer: Deltec TC3070s with self cleaning head, automatic drain and washing
Control: Full Apex system with dedicated router and LAN


The project has been in planning for around 2 years and we actually started the building work in December last year. The aquarium was finished in May and we started with water in early July but it's been a long hard journey with 90% of the work done by ourselves at home.

I will post up some pictures of the project journey but here to start is a strange animal that first occupied the aquarium for a few minutes as the water was 15º

Image

Avatar de l’utilisateur
branson
Aquariofou à lier !
Aquariofou à lier !
Messages :2920
Enregistré le :dimanche 07 novembre 2010 à 18:56
Localisation :Fully (VS)

Re: Swiss Cube: Project SWUBE

#2

Messagepar branson » jeudi 05 novembre 2015 à 23:14

Magnifique! ;--) ;--)

Avatar de l’utilisateur
José
Admin d'honneur
Admin d'honneur
Messages :6382
Enregistré le :vendredi 05 novembre 2010 à 16:29
Localisation :Chevry ou Genève
Contact :

Re: Swiss Cube: Project SWUBE

#3

Messagepar José » vendredi 06 novembre 2015 à 14:09

Superbe Projet me réjouis de voir la suite

José
:admin:

Avatar de l’utilisateur
dragonmaster75
Aquariodingue diplômé !
Aquariodingue diplômé !
Messages :669
Enregistré le :dimanche 02 décembre 2012 à 18:02
Localisation :martigny

Re: Swiss Cube: Project SWUBE

#4

Messagepar dragonmaster75 » vendredi 06 novembre 2015 à 15:14

wow... deja l'ancien etait superbe...vivement le nouveau ;--)

Avatar de l’utilisateur
fab_dvk
Aquariodingue !
Aquariodingue !
Messages :367
Enregistré le :vendredi 03 juin 2011 à 10:51
Localisation :1700 Fribourg

Re: Swiss Cube: Project SWUBE

#5

Messagepar fab_dvk » vendredi 06 novembre 2015 à 22:02

What's the latine name of the strange animal?
Can't find it on the web.. :-)
Nice project..

Avatar de l’utilisateur
Ridgeway
Aquariodingue diplômé !
Aquariodingue diplômé !
Messages :442
Enregistré le :vendredi 31 juillet 2015 à 18:07
Localisation :Bercher

Re: Swiss Cube: Project SWUBE

#6

Messagepar Ridgeway » vendredi 06 novembre 2015 à 23:01

Thanks for the comments, and yes that creature is unusual..... it's a Zebrasoma Kitty

First was to start with the basic plan:

Image

Avatar de l’utilisateur
Ridgeway
Aquariodingue diplômé !
Aquariodingue diplômé !
Messages :442
Enregistré le :vendredi 31 juillet 2015 à 18:07
Localisation :Bercher

Re: Swiss Cube: Project SWUBE

#7

Messagepar Ridgeway » vendredi 06 novembre 2015 à 23:04

More here:

Image

And from the back here:

Image

As you can see in order to Install the aquarium we had to make major modifications to the house. Removing 2 walls and then supporting the upper floor with new steel beams.

Avatar de l’utilisateur
Ridgeway
Aquariodingue diplômé !
Aquariodingue diplômé !
Messages :442
Enregistré le :vendredi 31 juillet 2015 à 18:07
Localisation :Bercher

Re: Swiss Cube: Project SWUBE

#8

Messagepar Ridgeway » vendredi 06 novembre 2015 à 23:13

So the work started with me cutting out the raised concrete floor that used to be a place to feed cows on as the house is an old farm. Nice job but cutting out reinforced concrete is tough work:

Image

Image

Then it was time to measure out the aquarium and see how much wall had to be cut out.....

Image

Image

Avatar de l’utilisateur
Ridgeway
Aquariodingue diplômé !
Aquariodingue diplômé !
Messages :442
Enregistré le :vendredi 31 juillet 2015 à 18:07
Localisation :Bercher

Re: Swiss Cube: Project SWUBE

#9

Messagepar Ridgeway » vendredi 06 novembre 2015 à 23:34

Due to the weight of the aquarium the base needed to be well made and substantial. The floor was dug out to around 40cm depth

Image

And then the pillars were made to the following specification

Image

Image

The weight of the water and glass is around 3250kgs plus the concrete pillars and equipment etc and we are close to 4000kgs.

Avatar de l’utilisateur
naso1260
Administrateur
Administrateur
Messages :2162
Enregistré le :jeudi 17 mai 2012 à 12:59
Localisation :Nyon

Re: Swiss Cube: Project SWUBE

#10

Messagepar naso1260 » vendredi 06 novembre 2015 à 23:38

Hello Nigel ;--)

Verry good job!!
C'est en faisant n'importe quoi qu'ont devient n'importe qui ;)

Salutations

Séb

xavier74
Aquariodingue !
Aquariodingue !
Messages :309
Enregistré le :mardi 09 avril 2013 à 13:34
Localisation :Gaillard

Re: Swiss Cube: Project SWUBE

#11

Messagepar xavier74 » vendredi 06 novembre 2015 à 23:39

amazing project.

samy-boy
Aquariodingue !
Aquariodingue !
Messages :390
Enregistré le :mercredi 10 novembre 2010 à 12:27
Localisation :Posieux

Re: Swiss Cube: Project SWUBE

#12

Messagepar samy-boy » samedi 07 novembre 2015 à 13:30

Gros projet me réjouis de voir l'évolution.

deejayprod
Aquariomalade !
Aquariomalade !
Messages :1404
Enregistré le :jeudi 15 septembre 2011 à 15:31
Localisation :Farvagny (Fribourg-Bulle)

Re: Swiss Cube: Project SWUBE

#13

Messagepar deejayprod » samedi 07 novembre 2015 à 17:37

Awesome
Behind a great reef tank there is always a great wife - :-D

Mon bac : http://www.reef-leman.ch/phpBB3/470l-de ... 2-330.html" onclick="window.open(this.href);return false;

Avatar de l’utilisateur
Ridgeway
Aquariodingue diplômé !
Aquariodingue diplômé !
Messages :442
Enregistré le :vendredi 31 juillet 2015 à 18:07
Localisation :Bercher

Re: Swiss Cube: Project SWUBE

#14

Messagepar Ridgeway » samedi 07 novembre 2015 à 22:04

Time for some light !

Image

And some plumbing parts

Image

And I started to collect some plate rocks for the aquascape

Image

And back to work to get that wall down !!!

Image

Image

Image

Image

Image

Image

And once the wall was out then the foundations could be dug out more to a final depth

Image

And then it was time to start to build the reinforcement for the steel pillars

Image

Avatar de l’utilisateur
Ridgeway
Aquariodingue diplômé !
Aquariodingue diplômé !
Messages :442
Enregistré le :vendredi 31 juillet 2015 à 18:07
Localisation :Bercher

Re: Swiss Cube: Project SWUBE

#15

Messagepar Ridgeway » samedi 07 novembre 2015 à 22:19

The base concrete was made and we had to add the new steel beam to keep the house in one piece :shock: :shock: removing so much of your house to get an aquarium in isn't such an easy task.....

Image

Then I got a friend to build the steel frames for the aquarium as it will be braceless, yep 110cm without glass cross support...

Image

Image


Retourner vers « Votre flaque »

Qui est en ligne

Utilisateurs parcourant ce forum : Aucun utilisateur enregistré et 5 invités